Detailed Photos
![MIG 270 Cmt Servo Welding](//www.micstatic.com/athena/img/transparent.png)
![MIG 270 Cmt Servo Welding](//www.micstatic.com/athena/img/transparent.png)
Product Description
Servo advantages:
I. Servo process: almost no splash, carbon dioxide welding/mixed gas, splash reduction by %99.
II. Quick arc start and close:
There is no splash in the arc, and the speed is increased by 2 times.
Third, the arc length is extremely adaptable
The mechanical method is to control the arc length. The arc length is not affected by the working surface and welding speed. The change of dry length and the arc adaptability are super strong.
IV. High-speed welding
The welding frequency and short-circuit frequency are 4 times higher, and 2mm iron plate is welded at a welding speed of 1 meter per minute. Weld 0.8mm iron plate at a welding speed of 2m/min.
V. Chaobo Welding
Suitable for ultra-thin plates and thin plates (0.4-3.0mm), the welding speed is 4 times faster than traditional MIG/MMA welding.
VI. Large gap welding
Servo process, welding iron plate, stainless steel, galvanized plate, aluminum to achieve large gap connection, and obtain excellent welding process.
VII. Advantages of servo welding aluminum
The welding thin aluminum plate is welded by servo short circuit, which is 4 times lower than the traditional single pulse/double pulse heat. The welding aluminum plate can weld 0.5mm plate and welding fish scale welding. The working principle of double pulse is high current and small current alternate welding, and the working principle of servo process is high current and stop alternating welding to realize the welding of thinner aluminum plate. The servo process is less than double-pulse splashing below 3.0mm of magnesium-aluminum.